Arm Remote Terminal Programmer Notes

Group Name: g_armRT

Development Path: vc_proj/RTSX/cs/ECI/g_armRT/

Group Id: <armSubsystemID>6<digit>

<armSubsystemID> ::= "1" | "2" | "3" | "4"

according to subsystem Id for each arm, currently (DXL = 1, DXR = 2, PXL = 3, VID = 4)

<digit> ::= "0" | "1" | "2" | "3" | "4" | "5" |
"6" | "7" | "8" | "9"
This indicates the exact form

Contents

FormInformation
ARM RT State Panel = armRTState
ARM RT Statistics On Panel = armRTStatOn
ARM RT Voltage Panel = armRTVolt

 Substitution Note: This is a template for each of the arms.

Every time your read "arm" it would be displayed as "_arM_" in the template file and as "dxl", "dxr", "pxl", and "vid" in the arm specific files.

Every time your read "ARM" it would be displayed as "_ArM_" in the template file and as "DXL", "DXR", "PXL", and "VID" in the arm specific files.

Form Infomation


ARM RT State Panel = armRTState

This panel summarizes the state of each of the RTs within the arm as well as the overall arm. For the arm system as a whole and for each LPU the operator may enable that processor and monitor its status. Each processor has two rows of information, the top is the status received by the main CPU, the bottom shows the monitor CPU's status. During nominal operations the values of the two rows should be similar.

 Form Name: armRTState

Label: "ARM RT State"

Form Id: <armSubsystemID>61


ARM RT Statistics On Panel = armRTStatOn

A series of statistics for each LPU within a particular arm, summarized by the ARM RT Statistics Panel, can be started, stopped and reset using this panel.

 Form Name: armRTStatOn

Label: "ARM RT Statistics On"

Form Id: <armSubsystemID>42

 


ARM RT Voltage Panel = armRTVolt

This panel displays the voltage across the different power buses on each LPU.

 Form Name: armRTVolt

Label: "ARM RT Voltage"

Form Id: <armSubsystemID>63